is a complete wall-mounted Dante audio
. It features two XLR mic
or line inputs on the front panels, plus two line outputs on a rear-panel detachable terminal block. Special software is not required to configure the DD-BN2M
. Each XLR
input provides three switches that may be set from the front of the unit when the cover plate is not installed. One switch enables or disables P48
phantom; the second
switch selects the mic
or line gain
range; the third switch sets the gain
. Each rear-panel output provides a switch to set the output to balanced
professional or unbalanced
. The DD-BN2M
fits a standard US dual-gang electrical box or an RDL WB-2 back box for installations in thinner European or equivalent walls. The DD-BN2M
is PoE powered, and is available in multiple
finishes with optional customized graphics.
The two XLR
inputs are each converted to a separate Dante network transmit channel
. Three gain
settings are switch-selectable for both the mic
and line input ranges to match condenser
or dynamic mic
levels and standard line levels.
Two Dante audio channels
are converted to balanced line level
on the rear-panel detachable terminal block. Each output provides +4 dBu balanced
for a network digital audio level
of -18 dBFS. Each output is equipped with a selector to unbalance the audio
to -10 dBV
. These switches are located on the top of the chassis and are set by the installer prior to mounting the unit.
The rear-panel outputs are intended for connection to RDL AMS connectors mounted in Decora-style plates that match the DD-BN2M
. AMS audio
connectors include RCA
, Mini and XLR
jacks. The output plate may be located together with the DD-BN2M
in a triple gang box or may be mounted remotely in a single box.
Valid PoE power
and synchronization to the Dante network are indicated by green LEDs
visible from the front of the unit.
is a professional grade product with discrete mic
preamplifiers for studio quality fidelity and low noise
performance, coupled through metal XLR
jacks housed in a stainless steel
chassis with dual powder-coated or stainless steel
Decora front plates.
's superior performance specifications make it ideally suited to the most demanding installations, and an exceptional value in commercial networked audio
systems. This full-featured product is engineered and manufactured in the U.S.A for continuous duty in demanding installations. Designed to outperform. Built to last.