Shure AD4QNP=-C Digital Wireless Receiver (C: 750-960 MHz)

Price: $7125.00
Instant Savings: -$1425.00
You Pay: $5700.00

Ship Time: 5-10 business days
Frequency: C: 750-960 MHz

Quad-Channel Receiver Without Power and RF Accessories Included, C: 750-960 MHz

Axient Digital offers dual and quad receiver options that open the door to a full range of features, from high-performance RF to transparent digital audio.

The AD4Q Four-Channel Digital Receiver sets a new standard in spectral efficiency. Groundbreaking performance features include wide tuning, low latency, High Density (HD) mode, and Quadversity, ensuring solid performance in the most challenging RF environments. Networked control, AES3 + Dante output, and signal routing options bring a new level of management and flexibility to your entire workflow.

Note: When purchasing separate wireless components, please match their frequency bands to ensure proper system operation.
  • Wide tuning range up to 184 MHz
  • True digital diversity reception per channel for drop-out resistance
  • Networked control with Wireless Workbench software and ShurePlus Channels iOS app
  • Quadversity mode for extended antenna coverage and improved RF signal-to-noise
  • Front panel headphone jack enables Dante Cue and Dante Browse monitoring
  • Configurable Ethernet switch for redundant Dante digital output
  • Switchable XLR and AES3 outputs
  • Channel Quality meter displays RF signal-to-noise
  • Locking AC connectors
  • Optional DC module available to support redundant power
  • RF Carrier Frequency Range: 470-960 MHz, varies by region (See Frequency Range and Output Power table)
  • Working Range: 100 m (330 ft)
    Note: Actual range depends on RF signal absorption, reflection and interference.
  • RF Tuning Step Size: 25 kHz, varies by region
  • Image Rejection: >70 dB, typical
  • RF Sensitivity: −98 dBm at 10-5 BER
  • Latency Analog Output:
    STD: 2.08 ms
    HD: 2.96 ms
  • Audio Frequency Response:
    AD1: 20 - 20 kHz (±1 dB)
    AD2: Note: Dependent on microphone type
  • Signal-to-Noise Ratio(Dynamic Range): typical, 20 Hz to 20 kHz, receiver gain setting = -12 dB
    XLR Line Output: A-Weighted: 120 dB / Unweighted: 117 dB
    Digital (AES3/Dante): A-Weighted:130 dB / Unweighted: 126 dB
  • Total Harmonic Distortion: -6 dBFS, 1 kHz, System Gain @ +10
  • System Audio Polarity: Positive pressure on microphone diaphragm produces positive voltage on pin 2 (with respect to pin 3 of XLR output) and the tip of the 6.35 mm (1/4-inch) output.
  • Operating Temperature Range: -18°C (0°F) to 50°C (122°F)
    Note: Battery characteristics may limit this range.
  • Storage Temperature Range: -29°C (-20°F) to 65°C (149°F)
  • Audio Output
  • Gain Adjustment Range: −18 to +42 dB in 1 dB steps (plus Mute setting)
  • Configuration:
    XLR: Transformer Coupled Balanced (1=ground, 2=audio +, 3=audio −)
    TRS: Transformer Coupled Balanced (Tip = Audio +, Ring = Audio -, Sleeve = Ground)
  • Impedance: 100 Ω, Typical, XLR Line Out
  • Full Scale Output (200K Ωload):
    LINE setting: +18 dBV:
    MIC setting: −12 dBV
    TRS: +8 dBV
  • Mic/Line Switch: 30 dB pad
  • Phantom Power Protection: Yes
  • Dimensions: 44 x 483 x 333 mm H x W x D
  • Weight: 4.8 kg (10.6 lbs), without antennas
  • Housing: Steel; Extruded aluminum
  • Power Requirements: 100 to 240 V AC, 50-60 Hz, 0.68 A max.
  • Thermal Power Dissipation:
    Maximum: 31 W (106 BTU/hr)
    Idle: 21 W (72 BTU/hr)
  • DC Power Requirements: 10.5 to 32V DC4.0 A max.
  • Network Interface: 10/100 Mbps, 1Gbps, Dante Digital Audio
  • Network Addressing Capability: DHCP or Manual IP address
  • Maximum Cable Length: 100 m (328 ft)
  • Cascade Output
  • Connector Type: BNC
    Note: For connection of one additional receiver in the same band
  • Configuration: Unbalanced, passive
  • Impedance: 50 Ω
  • Insertion Loss: 0 dB, typical
  • RF Input
  • Spurious Rejection: >80 dB, typical
  • Connector Type: BNC
  • Impedance: 50 Ω
  • Bias Voltage: 12 to 13.5 V DC, 150 mA maximum, per antenna
    Switchable on-off
  • RF Carrier Frequency Rangemodel dependent:
    AD4Q=A: 470-636 MHz
    AD4Q=B: 606-810 MHz
    AD4Q=C: 750-960 MHz
Brand Shure
Model AD4QNP=-C
Part Number AD4QNP=-C
UPC 042406533904
Product Category Wireless Transmitters
Unit of Measure EACH
Shipping Weight 14.39 lbs.
Shure AD4QNP=-C Digital Wireless Receiver (C: 750-960 MHz)
$ 5700.00 New Available online AD4QNP=-C
Connect with General Theatrical Supply
Why Choose General Theatrical Supply?

35+ Years in the Business

General Theatrical Supply isn't new to the Theatrical & Stage Lighting industry. We have been servicing the needs of professionals for nearly 40 years! We have the expertise to help you get the job done right. The first time.

Real World Convenience

General Theatrical Supply has built lasting relationships with the brands you love! We have decades of experience working with our suppliers. We are equipped to get you what you need, when you need it. When you need it.

Staff with Know-How

General Theatrical Supply has long believed that experience and knowledge are vital to building relationships with our customers. We focus on getting, and keeping, a staff who know and love the Pro Audio & Video world. People like you.

Prices That Don't Suck

General Theatrical Supply is one of the largest suppliers of professional audio & video gear in the Mountain West. We have one of the largest inventories in the industry. That means we can save you money! The right price.

General Theatrical Supply, Inc. BBB Business Review Coupons on